Digital Transfer Adaptors
Shop Digital Transfer Adaptors
Digital Transfer Adaptors
Digital transfer adapters allow you to mount 3D printed models without plaster on all Stratos 100, 200 and 300 articulators with Adesso magnetic bases
SKU: DP600250
For tips on printing models for use with the digital transfer adaptors, please click here.
exocad Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models. Note that these instructions show the Artex articulator, but the methodology used for Stratos articulators is identical.
To download the attachment files that are added to the posterior of the models, click here. This version is unlocked, meaning the attachment files can be moved to any position needed on the screen.
To download the attachment files that are added to the posterior of the models, click here. This version is locked, meaning the attachment files will auto-position on the screen and attach to the modes. To see how this works, a video is available here.
If you need STL files for the Stratos digital adaptors: for the upper adaptor, click here and for the lower adaptor, click here.
3Shape Users: If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in 3Shape Model Builder. Once downloaded, use the Model Builder Control Panel to import the attachments. To follow this methodology, you need to download the model attachment file shown below:
Mesh Mixer Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models.
Medit Users - If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in Medit.
To download the attachment file for Medit, please click here.
To download the model attachments (the “tail” with two holes in the posterior), click here. (credit: The Kois Center)
Digital transfer adapters allow you to mount 3D printed models without plaster on all Artex carbon fiber articulators with Splitex magnetic bases
SKU: DP600350
For tips on printing models for use with the digital transfer adaptors, please click here.
exocad Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models.
To download the attachment files that are added to the posterior of the models, click here.This version is unlocked, meaning the attachment files can be moved to any position needed on the screen.
To download the attachment files that are added to the posterior of the models, click here.This version is locked, meaning the attachment files will auto-position on the screen and attach to the modes. To see how this works, a video is available here.
If you need STL files for the Artex digital adaptors: for the upper adaptor, click here and for the lower adaptor, click here.
3Shape Users: If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in 3Shape Model Builder. Once downloaded, use the Model Builder Control Panel to import the attachments. To follow this methodology, you need to download the model attachment file shown below:
For 3Shape users who would like to download the digital version of these adaptors, see below. The digital adaptor file will open in 3Shape with the adaptors properly mounted/positioned on the virtual articulator. Once the file below has been downloaded, you will import the file into 3Shape via the control panel.
For version 2022 users, click here.
For version 2023 users, click here.
Mesh Mixer Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models.
Medit Users - If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in Medit.
To download the attachment file for Medit, please click here.
To download the model attachments (the “tail” with two holes in the posterior), click here. (credit: The Kois Center)
Digital transfer adapters allow you to mount 3D printed models without plaster on the all SAM 2, SAM 3, Neo and SE articulators with Axiosplit magnetic bases
SKU: DP600450
For tips on printing models for use with the digital transfer adaptors, please click here.
exocad Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models. Note that these instructions show the Artex articulator, but the methodology used for SAM articulators is identical.
To download the attachment files that are added to the posterior of the models, click here.This version is unlocked, meaning the attachment files can be moved to any position needed on the screen.
To download the attachment files that are added to the posterior of the models, click here.This version is locked, meaning the attachment files will auto-position on the screen and attach to the modes. To see how this works, a video is available here.
If you need STL files for the SAM digital adaptors: for the upper adaptor, click here and for the lower adaptor, click here. Please note these files are intended for use on SAM virtual articulators with the Axiosplit magnetic bases. These files have not been oriented/mounted on the virtual articulator.
3Shape Users: If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in 3Shape Model Builder. Once downloaded, use the Model Builder Control Panel to import the attachments. To follow this methodology, you need to download the model attachment file shown below:
Mesh Mixer Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models.
Medit Users - If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in Medit.
To download the attachment file for Medit, please click here.
To download the model attachments (the “tail” with two holes in the posterior), click here. (credit: The Kois Center)
Digital transfer adapters allow you to mount 3D printed models without plaster on all Denar Mark 310, 320 and 330 articulators
SKU: DP600650
For tips on printing models for use with the digital transfer adaptors, please click here.
exocad Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models. Note that these instructions show the Artex articulator, but the methodology used for Denar Mark 300 series articulators is identical.
To download the attachment files that are added to the posterior of the models, click here.This version is unlocked, meaning the attachment files can be moved to any position needed on the screen.
To download the attachment files that are added to the posterior of the models, click here.This version is locked, meaning the attachment files will auto-position on the screen and attach to the modes. To see how this works, a video is available here.
If you need STL files for the Denar Mark 300 series digital adaptors: for the upper adaptor, click here and for the lower adaptor, click here.
3Shape Users: If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in 3Shape Model Builder. Once downloaded, use the Model Builder Control Panel to import the attachments. To follow this methodology, you need to download the model attachment file shown below:
Mesh Mixer Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models.
Medit Users - If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in Medit.
To download the attachment file for Medit, please click here.
To download the model attachments (the “tail” with two holes in the posterior), click here. (credit: The Kois Center)
Digital transfer adapters allow you to mount 3D printed models without plaster on all KaVo/Protar articulators with magnetic mounting
SKU: DP600550
For tips on printing models for use with the digital transfer adaptors, please click here.
exocad Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models. Note that these instructions show the Artex articulator, but the methodology used for KaVo articulators is identical.
To download the attachment files that are added to the posterior of the models, click here.This version is unlocked, meaning the attachment files can be moved to any position needed on the screen.
To download the attachment files that are added to the posterior of the models, click here.This version is locked, meaning the attachment files will auto-position on the screen and attach to the modes. To see how this works, a video is available here.
If you need STL files for the KaVo digital adaptors: for the upper adaptor, click here and for the lower adaptor, click here. Please note these files are intended for use on KaVo virtual articulators and have not been oriented/mounted on the virtual articulator.
3Shape Users: If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in 3Shape Model Builder. Once downloaded, use the Model Builder Control Panel to import the attachments. To follow this methodology, you need to download the model attachment file shown below:
Mesh Mixer Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models.
Medit Users - If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in Medit.
To download the attachment file for Medit, please click here.
To download the model attachments (the “tail” with two holes in the posterior), click here. (credit: The Kois Center)
Digital transfer adapters allow you to mount 3D printed models without plaster on all Hanau articulators with magnetic mounting.
SKU: DP600750
For tips on printing models for use with the digital transfer adaptors, please click here.
exocad Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models. Note that these instructions show the Artex articulator, but the methodology used for Hanau articulators is identical.
To download the attachment files that are added to the posterior of the models, click here.This version is unlocked, meaning the attachment files can be moved to any position needed on the screen.
To download the attachment files that are added to the posterior of the models, click here.This version is locked, meaning the attachment files will auto-position on the screen and attach to the modes. To see how this works, a video is available here.
If you need STL files for the Hanau digital adaptors: for the upper adaptor, click here and for the lower adaptor, click here. Please note these files are intended for use on Hanau virtual articulators and have not been oriented/mounted on the virtual articulator.
3Shape Users: If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in 3Shape Model Builder. Once downloaded, use the Model Builder Control Panel to import the attachments. To follow this methodology, you need to download the model attachment file shown below:
Mesh Mixer Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models.
Medit Users - If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in Medit.
To download the attachment file for Medit, please click here.
To download the model attachments (the “tail” with two holes in the posterior), click here. (credit: The Kois Center)
Digital transfer adapters allow you to mount 3D printed models without plaster on all Whip Mix series 2000, 3000 and 4600 articulators with Accu-Mount table and Quick Mount magnetics.
SKU: DP600850
For tips on printing models for use with the digital transfer adaptors, please click here.
exocad Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models. Note that these instructions show the Artex articulator, but the methodology used for Whip Mix articulators is identical.
To download the attachment files that are added to the posterior of the models, click here.This version is unlocked, meaning the attachment files can be moved to any position needed on the screen.
To download the attachment files that are added to the posterior of the models, click here.This version is locked, meaning the attachment files will auto-position on the screen and attach to the modes. To see how this works, a video is available here.
If you need STL files for the Whip Mix digital adaptors: for the upper adaptor, click here and for the lower adaptor, click here. Please note these files are intended for use on Whip Mix Quick Mount virtual articulators and have not been oriented/mounted on the virtual articulator.
3Shape Users: If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in 3Shape Model Builder. Once downloaded, use the Model Builder Control Panel to import the attachments. To follow this methodology, you need to download the model attachment file shown below:
Mesh Mixer Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models.
Medit Users - If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in Medit.
To download the attachment file for Medit, please click here.
To download the model attachments (the “tail” with two holes in the posterior), click here. (credit: The Kois Center)
Digital transfer adapters allow you to mount 3D printed models without plaster on all Denar articulators with magnetic mounting (except Denar Mark 310, 320 and 330)
SKU: DP600950
For tips on printing models for use with the digital transfer adaptors, please click here.
exocad Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models. Note that these instructions show the Artex articulator, but the methodology used for Denar articulators is identical.
To download the attachment files that are added to the posterior of the models, click here.This version is unlocked, meaning the attachment files can be moved to any position needed on the screen.
To download the attachment files that are added to the posterior of the models, click here.This version is locked, meaning the attachment files will auto-position on the screen and attach to the modes. To see how this works, a video is available here.
If you need STL files for the Denar digital adaptors: for the upper adaptor, click here and for the lower adaptor, click here. Please note these files are intended for use on Denar articulators and have not been oriented/mounted on the virtual articulator.
3Shape Users: If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in 3Shape Model Builder. Once downloaded, use the Model Builder Control Panel to import the attachments. To follow this methodology, you need to download the model attachment file shown below:
Mesh Mixer Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models.
Medit Users - If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in Medit.
To download the attachment file for Medit, please click here.
To download the model attachments (the “tail” with two holes in the posterior), click here. (credit: The Kois Center)
Digital transfer adapters allow you to mount 3D printed models without plaster on all AD2 and Panadent articulators with magnetic mounting
Not designed for use with PAL articulators
SKU: DP600050
For tips on printing models for use with the digital transfer adaptors, please click here.
exocad Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models. Note that these instructions show the Artex articulator, but the methodology used for AD2 and Panadent articulators is identical.
To download the attachment files that are added to the posterior of the models, click here. This version is unlocked, meaning the attachment files can be moved to any position needed on the screen.
To download the attachment files that are added to the posterior of the models, click here. This version is locked, meaning the attachment files will auto-position on the screen and attach to the modes. To see how this works, a video is available here.
If you need STL files for the AD2-Panadent digital adaptors: for the upper adaptor, click here and for the lower adaptor, click here.
3Shape Users: If you’re doing average value (Kois 100mm) mounting, click hereto watch an instructional video in 3Shape Model Builder. Once downloaded, use the Model Builder Control Panel to import the attachments. To follow this methodology, you need to download the model attachment file shown below:
3Shape 2021 attachment DME file can be downloaded here.
3Shape 2022 attachment DME file can be downloaded here.
3Shape 2023 attachment DME file can be downloaded here.
3Shape 2024 attachment DME file can be downloaded here.
3Shape 2025 attachment DME file can be downloaded here.
Mesh Mixer Users: If you’re doing average value (Kois 100mm) mounting, click here to download instructions for formatting and printing your models.
Medit Users - If you’re doing average value (Kois 100mm) mounting, click here to watch an instructional video in Medit.
To download the attachment file for Medit, please click here.
To download the model attachments (the “tail” with two holes in the posterior), click here. (credit: The Kois Center)